Axial Wraith Compatible Aluminum Chassis Linkage (Gunmetal) - AW-23006-GU by Jazrider  [AW-23006-GU]

Axial Racing Wraith Aluminum Chassis Linkage (Gunmetal)
Price:
£13.74
Brand:
JAZRIDER
Model:
AW-23006-GU
Condition:
Brand New
Available in shop
Write a review

Precision aluminum linkage for Axial Wraith

The JAZRIDER AW-23006-GU is an aluminum chassis linkage designed for the Axial Wraith platform and finished in gunmetal. It serves as a metal upgrade to the stock plastic links, delivering firmer response and aiding repeatable chassis geometry during low-speed rock crawling and setup work.

Use this component strictly as a scale RC upgrade; it is not intended for any real-vehicle reference.

Fitment advice: the unit uses the Wraith's factory points but requires checking of the original screws and spacers for correct engagement. Cycle the suspension after loose fitting to detect any binding, then torque to recommended values. Some heavily modified kits may need minor adjacent part trimming; do not expect additional fittings in the box.

Specifications

  • Item Aluminum Chassis Linkage (Gunmetal)
  • Material Aluminum
  • Model Number AW-23006-GU
  • Compatibility Axial Wraith

This AW-23006-GU linkage is a straightforward metal replacement for Axial Wraith models where improved stiffness and a durable appearance are required, and it becomes part of tuning work focused on traction and geometry.

How do I verify this will fit my Wraith variant?

Measure the stock link's hole centers and compare with the replacement; the AW-23006-GU follows standard Wraith dimensions but differences in custom frames can affect fit.

What corrosion prevention steps are recommended?

After wet or salty runs, rinse and dry the link, then inspect for finish damage; damaged areas can be protected with light corrosion-inhibiting treatments suitable for hobby parts.

Any torque guidance for the mounting screws?

Use conservative torque values to avoid stripping small chassis threads; tighten incrementally and verify there is no binding through full suspension articulation.

Will the finish chip under heavy use?

The gunmetal finish is durable for normal hobby use, but impacts and abrasion can chip the coating; inspect regularly and touch up or replace if corrosion is detected.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved