Axial Yeti Aluminum C Hub Carrier Upgrade for Scale Off-Road - YT-25001-BK by Jazrider  [YT-25001-BK]

Axial Racing Yeti Aluminum C Hub Carrier (Black)
Price:
£7.73
Brand:
JAZRIDER
Model:
YT-25001-BK
Condition:
Brand New
Write a review

C-hub carrier for scale Yeti builds

This aluminum C hub carrier is intended for use on Axial Yeti chassis and is supplied as a single aftermarket replacement. It is an RC-scale component suitable where a metal replacement is preferred to extend service life and improve durability.

Fitting follows the stock C-hub mounting pattern and generally reuses the vehicle's original fasteners and bearings. During installation ensure bearing seating is correct and screw engagement is appropriate, then re-check steering toe and camber settings after assembly.

From a tuning perspective the carrier secures the steering knuckle and suspension link, so replacing a worn carrier helps preserve suspension geometry and supports consistent adjustments for handling and setup work.

How does swapping to an alloy carrier change durability?

An alloy carrier resists wear and impact damage better than plastic, lowering the chance of deformation under load and extending service intervals on off-road models.

Will I need different fasteners to fit this part?

Most installations use the stock fasteners, but inspect screw lengths and thread engagement; replace any worn hardware with equivalent-length screws to avoid binding or poor clamping.

Does this affect cornering or steering precision?

By reducing hub flex the alloy carrier can improve steering precision under load; always verify geometry and make small adjustments to toe and camber to tune handling to preference.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved