AXIAL YETI XL Centre Transmission Case YTL038 Upgrade Part by GPM  [YTL038]

AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038
Price:
£49.73
Brand:
GPM
Model:
YTL038
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"

Aftermarket aluminium centre case for the YETI XL

This aluminium centre transmission case is an aftermarket replacement designed around the AXIAL Racing YETI XL chassis. It serves as the housing for the centre gearbox assembly in scale electric off-road models, providing a robust mounting surface for gears and bearings while following the original layout for direct fit in most common configurations.

To fit the part remove the original plastic case, transfer the internal gears and bearings into the new housing, and secure with the supplied stainless steel screws. When reassembling verify gear mesh, align shafts and bearings carefully, and tighten fixings progressively to avoid misalignment. The metal case supports routine tuning and maintenance where extra rigidity and improved heat characteristics are beneficial.

Packing includes

  • Stainless Steel Counter Sink Flat Head Screw 3X25 - 4pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X18 - 7pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X16 - 3pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X14 - 3pcs
  • Stainless Steel Button Head Screw 2.5X8 - 3pcs

Specifications

  • Item: Aluminium center transmission case
  • Material: Aluminum
  • Model Number: YTL038
  • Compatibility: AXIAL Racing YETI XL

Use this housing as a maintenance replacement or upgrade to improve gearbox stability and extend component life; always check fit and fastener torque on final assembly.

Is this compatible with stock YETI XL gears?

Yes, it is made to the same internal layout as the stock case and generally accepts the standard gears and bearings without modification.

Will the aluminium case affect handling?

Added stiffness in the drivetrain can improve feedback and reduce flex-related issues, but overall handling depends on the full chassis setup.

Any special lubrication needed?

Use the same grease and oils you normally apply to the stock gearbox; ensure bearings and gear faces are properly lubricated before final assembly.

How often should I inspect the case?

Check the case and fasteners at routine service intervals or after heavy running; look for loose screws, wear on bearing seats, and any signs of impact damage.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved