Axial-compatible 15mm Brass Wheel Hex Adapters RR010X/1215 for RR10 Bomber by GPM  [RR010X/1215]

AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215
Price:
£12.50
Brand:
GPM
Model:
RR010X/1215
GTIN:
4894538330533
Condition:
Brand New
Write a review
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"

15mm brass wheel hex adapters for improved fit

The RR010X/1215 28-piece adapter set is intended for Axial hub interfaces and replaces or extends standard hexes to change wheel offset and widen the track for more predictable handling on rough ground.

Machined brass bodies provide additional wheel-end mass, stated at approximately 11g per adapter, and the 15mm thickness narrows the wheel-to-hub gap versus thinner parts to aid secure wheel mounting in demanding conditions.

Fitting is simple with the included hardware; the kit contains Delrin rings, pins, washers, screws and shims so standard installations on listed models do not typically need extra components.

Packing includes

  • Hex Adapter - 4pcs
  • Delrin Ring 5x7x2.5 - 4pcs
  • Steel Pin 2x10 - 4pcs
  • 5mm Metal Washer - 4pcs
  • Stainless Steel Screw Shaft M3x11.5 - 4pcs
  • Stainless Steel Hex Socket Screw 10mm - 4pcs
  • Shim 5x10x1 - 4pcs

Original Name / Part No:

AX30249 (RR10),AX30429 (WRAITH, SMT10 MONSTER JAM)

Compatible Models

  • Axial WRAITH 4WD ROCK RACER
  • RR10 BOMBER
  • SMT10 GRAVE DIGGER AX90055
  • SMT10 MAX-D AX90057

These 15mm brass hex adapters are a practical upgrade for Axial owners wanting to tighten wheel fitment and increase track width using the supplied hardware and standard hub mounting points.

Are these suitable for off-road use?

Yes, the added mass and wider track help stabilise wheels on rough, off-road surfaces and reduce unwanted wheel movement.

Do these work with SMT10 Monster Jam models?

Compatibility includes SMT10 variants listed in the compatibility box, alongside RR10 Bomber and WRAITH models.

What should I check after fitting?

After installation, check for correct pin seating, secure screw torque and any necessary shim adjustments to ensure no binding and proper wheel alignment.

Will these affect tyre clearance?

Widening the track may change tyre clearance at the guards; verify clearance with your chosen tyre and adjust wheel offset or shims if needed.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved