Front Outer Suspension Pin Set for Yokomo YZ-2 & B-MAX2 - B2-009AFA [B2-009AFA]

Yokomo B2-009AFA Front Outer Suspension Pins for YZ-2/B-MAX2

Price:

£3.48

Brand:

Yokomo

Model:

B2-009AFA

GTIN:

0639342181247

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Suspension Parts category

Write a review

Description
FAQ

Outer front suspension pins — YZ-2 & B-MAX2 fitment

These front outer suspension pins are supplied as a two-piece set for 1/10 electric touring models, intended to replace the outer pivot pin on the front suspension arm. They are suitable for maintenance and setup tasks on the compatible Yokomo YZ-2 and B-MAX2 series of chassis.

In service the pins secure the outer pivot of the front arm and help maintain correct roll centre and steering characteristics when old pins are replaced. Confirm smooth rotation and correct alignment after fitting to maintain the chassis geometry.

Fitting advice: remove the wheel and front arm to access the pivot area, keep mating surfaces clean, and verify there is no unwanted movement after refit. These are routine service parts rather than a dedicated upgrade item.

Packing list

Front outer suspension pins - 2 pcs

Compatible Models

B-MAX2MR2
B-MAX2MR3
B-MAX2RS
B-YZ2
B-YZ2CA
B-YZ2DT
B-YZ2DTM
B-YZ2DTMW
B-YZ2DTM2
B-YZ2CAL2
B-YZ2T
B-YZ2DTM2S

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do these pins fit all YZ-2 and B-MAX2 variants listed here?

They are intended for the models listed in the compatibility section. Because there are many sub-variants, check the arm bore and pin diameter on your specific chassis and carry out a trial fit before final assembly to ensure correct fitment.

What should I check after fitting these pins?

After installation confirm the arm swings freely, there is no lateral play at the pivot, and steering geometry is unchanged. If any binding or excessive looseness is present, remove the assembly and inspect for debris or incorrect seating.