Yokomo B7-201LS Steering Limiter Screw Kit  [B7-201LS]

Yokomo B7-201LS Steering Limiter Screw (8.0/8.5/9.0mm 2each) for BD7
Price:
£11.11
Brand:
Yokomo
Model:
B7-201LS
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Yokomo B7-201LS Steering Limiter Screw (8.0/8.5/9.0mm 2each) for BD7" title="Yokomo B7-201LS Steering Limiter Screw (8.0/8.5/9.0mm 2each) for BD7"

Control Steering Range with the Yokomo B7-201LS Kit

The Yokomo B7-201LS Steering Limiter Screw set is a compact tuning part that limits steering extremes and protects the steering mechanism. Installed as a centre link stopper on the steering post, the screws stop the wheels and servo from reaching damaging angles. The pack contains three diameters 8.0mm, 8.5mm and 9.0mm so you can select the maximum cutting angle best suited to your setup and track. It is a straightforward solution for drivers wanting repeatable steering behaviour.

Models That Work with This Set

This screw set works with the following Yokomo chassis models:

  • MRTC-BD716O
  • MRTC-BD716S
  • MRTC-BD716
  • MRTC-BD716H
  • MRTC-BD8
  • MRTC-BD8A
  • MRTC-BD8-P
  • MRTC-BD8AP
  • MRTC-BD8SV
  • MRTC-BD818A
  • MRTC-BD818
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How will changing the limiter affect handling?

Altering the limiter diameter changes maximum wheel angle which affects turn-in aggressiveness and mid-corner balance. Smaller diameters increase front bite while larger ones soften response.

Is any special tooling required to swap screws?

Normal hex or screwdriver tools used for steering post maintenance are sufficient. Fit the chosen screw and check for smooth travel and no binding.

Should I re-trim my radio after fitting?

Yes, rechecking servo endpoints and steering trim is recommended after changing the limiter to ensure neutral alignment and prevent unwanted steering input.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved