Yokomo B8-301SAA Aluminum Separate Suspension Mount  [B8-301SAA]

Yokomo B8-301SAA Aluminum separate sus mount
Price:
£16.43
Brand:
Yokomo
Model:
B8-301SAA
GTIN:
0639342204199
Condition:
Brand New
Write a review

Improve BD8 Series Setup with Yokomo B8-301SAA

The Yokomo B8-301SAA Aluminum Suspension Mount provides a simple way to refine the front suspension setup on BD8 machines. Installed at the rear of the front suspension, it allows you to alter the suspension pin distance. Fitting a different resin bush (B8-301BS?700) moves the pin spacing between 39.5mm and 42.7mm for setup flexibility.

Compatibility with BD8 Family

The mount is suitable for the following BD8 chassis models:

  • MRTC-BD8
  • MRTC-BD8A
  • MRTC-BD8-P
  • MRTC-BD8AP
  • MRTC-BD8SV
  • MRTC-BD818A
  • MRTC-BD818
  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10FF
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which part changes the pin spacing?

The resin bush referenced as B8-301BS?700 is swapped to alter pin spacing. Use the correct replacement bush and retain original hardware for secure installation.

Will this change on-track behaviour on tarmac?

Adjusting pin distance influences suspension geometry and can affect turn-in and corner exit. Test settings on your usual surface to see how handling changes with each spacing.

Is installation reversible?

Yes, the mount is a reversible modification. Keep original resin bushes and parts so you can revert to the stock setup if required.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved