Yokomo B9-32UA19A Upper Bulkhead (A) for BD9  [B9-32UA19A]

Yokomo B9-32UA19A Upper Bulkhead (A)(F Left/R Right) for BD9
Price:
£21.00
Brand:
Yokomo
Model:
B9-32UA19A
GTIN:
0639342204496
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10FF category
Write a review

Compatibility notes for Upper Bulkhead (A) on BD9 and BD10

This is the Yokomo B9-32UA19A upper bulkhead (A) intended for BD9-family RC touring chassis. Supplied as 1 pcs, it is suitable for the front-left position or the rear-right position depending on chassis variant.

Install this bulkhead when replacing a damaged upper mount or when switching suspension geometry during setup. It locates the upper arm and provides the mount for suspension links, so ensure correct left/right orientation and part-code match prior to tightening fasteners.

Specifications

  • Item: Upper Bulkhead (A) front-left / rear-right
  • Material: Not specified
  • Model Number: B9-32UA19A
  • Compatibility: MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA

Compatible Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA

Confirm chassis code against the compatibility list, verify left/right placement, inspect link geometry and fasteners after fitment, and carry out a static function check before running the car.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I confirm this is the correct part for my chassis code?

Match your chassis code against the listed compatible models. If your chassis code appears in the compatibility list, the B9-32UA19A is the correct upper bulkhead for the specified mounting positions.

Are BD9 and BD10 mounts always interchangeable?

Not always. Some BD10 variants use different upper mount geometries; check the specific model codes and trial-fit where possible before committing to a swap.

What should I look for when replacing a bulkhead across different variants?

Inspect screw hole alignment, link mounting points and boss dimensions. Ensure the replacement matches the mounting pattern of your chassis to avoid misalignment or binding.

Any final fitment verification steps?

After installation, verify left/right orientation, tighten hardware correctly, check link geometry through travel, and perform a static rig check before driving.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved