Yokomo BD-009AA Suspension Arm Pins 2x23mm for BD8/BD7  [BD-009AA]

Yokomo BD-009AA Outer Suspension Arm Pins (2x23mm 4pcs) for BD8/BD7
Price:
£3.48
Brand:
Yokomo
Model:
BD-009AA
GTIN:
0639342205219
Condition:
Brand New
Write a review

Upgrade Your BD8 or BD7 with Precision Arm Pins

Install these 2x23mm suspension arm pins to restore tight arm fit on Yokomo BD8 and BD7 models. With a precise 2mm diameter, they are designed to limit unwanted movement and help reduce unsprung mass for more consistent track behaviour.

Key Points About the Yokomo BD-009AA Pins

  • Precision Manufacture: 2mm diameter ensures reliable fit and reduced slop at the arm pivot.
  • Lower Unsprung Mass: Smaller pin mass aids suspension reaction and tyre contact on uneven surfaces.
  • Designed For BD8/BD7: Intended for use in the outer suspension arms of Yokomo BD8 and BD7 chassis.
  • Suitable for Regular Use: Engineered to cope with frequent track sessions and servicing.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
A bench press or a firm press fit using a driver that protects the pin ends will make installation straightforward. Avoid hammering directly on the pin to prevent damage.
They are sized for the outer arm bore common to BD8 and BD7 parts. Aluminium arms with the same bore dimension should accept the pins, but check fit before final assembly.
Look for increased lateral play in the arm, inconsistent toe or camber under load, or visible scoring on the pin. Replace if any of these appear.
A light coating of suitable grease on mating surfaces can ease movement during fitting but avoid heavy oils that attract grit and accelerate wear.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved