Rear Hub Carrier for BD7 and BD5 0 degree - Yokomo BD-415A00  [BD-415A00]

Yokomo BD-415A00 Aluminum Rear hub carrier 0degreefor bd7/BD5
Price:
£10.42
Brand:
Yokomo
Model:
BD-415A00
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD5 category
Write a review

0 degree rear hub carrier compatible with BD7/BD5

The BD-415A00 aluminium rear hub carrier replaces the original 0 degree unit on touring chassis and matches the stock toe setup while providing greater rear rigidity. It is designed to influence compliance at the hub without altering the baseline toe geometry.

Installation notes: fit as a direct replacement using the existing mounting points for the 0 degree carrier. Confirm suspension arm alignment and wheel hex seating before final torque. Apply thread locker as needed and observe the chassis manufacturer's recommended torque values.

Compatibility notes: retaining the factory 0 degree toe means predictable mapping across setups; pairing this carrier with alternate arm mount positions or different carrier angles will change roll centre and lateral behaviour rather than toe itself.

Packing includes

  • Aluminum rear hub carrier - 2 pcs

Compatibility

  • DP-DIB2
  • DP-DIB2R
  • DP-DIB2A
  • DP-DIB2RA
  • DP-DIB
  • DP-DIBR
  • DP-DIBG
  • DP-DIBRS
  • DP-DIBL
  • DP-DIBLR
  • DP-DIBLG
  • DP-DIBRSB
  • MRTC-BD7RS
  • MRTC-BD715B
  • MRTC-BD715O
  • MRTC-BD715S
  • MRTC-BD716
  • MRTC-BD716H
  • MRTC-BD716O
  • MRTC-BD716S
  • MRTC-BD7RS2
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this carrier fit all BD7 and BD5 variants listed in the compatibility section?

Yes, the BD-415A00 is intended to fit the chassis variants listed in the compatibility section by using the same mounting geometry as the stock 0 degree carrier.

Does installing this change rear toe settings?

No. This 0 degree carrier maintains the factory toe-in. To alter toe you would need a carrier with a different angle or adjustable mounting hardware.

How does this carrier interact with different arm mounts or roll centre adjustments?

Since the unit preserves toe, handling changes come from roll centre and lateral stiffness variations. Experiment with arm mount positions and complementary parts to tune roll behaviour while keeping toe constant.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved