Bullet Flux MT and ST Alloy Steering Assembly 3pcs BST048 by GPM  [BST048]

HPI Bullet Flux x Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BST048
Price:
£13.31
Brand:
GPM
Model:
BST048
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision steering assembly for Bullet Flux platforms

This 3pcs steering assembly is an RC-scale replacement designed for HPI Bullet Flux MT and ST models and carries the model number BST048. The kit combines aluminium steering components with pre-fitted bearings into a compact three-piece set for replacing tired linkages or tuning in firmer steering response.

Supplied as a straightforward hardware upgrade, the aluminium alloy parts aim to increase stiffness compared with standard plastic items while the bearings reduce pivot friction. The assembly is intended to mate with the vehicle's existing steering links and standard servo attachments; servo and other electronics are not part of the kit.

Specifications

  • Item: Alloy steering assembly with bearings, 3pcs set
  • Material: Aluminum alloy
  • Model Number: BST048
  • Compatibility: HPI Bullet Flux MT and ST

For model technicians and experienced hobbyists using Bullet Flux MT or ST, this alloy steering assembly gives a simple, effective parts-level upgrade to improve steering rigidity and minimise play at pivot points, fitted using standard hex tools.

Does BST048 require special servos?

No special servos are required, but a servo with good torque is recommended if you run heavier tyres or close steering endpoints to avoid binding.

How often should bearings be serviced?

Service interval depends on use; inspect and clean bearings after dusty or wet sessions and apply a small amount of light oil if rotation becomes gritty.

Will this help reduce steering slop?

Yes. The stiffer aluminium parts combined with bearings are intended to reduce flex and slop at common wear points in the steering linkage.

Any adjustments after fitment?

After fitting, re-check linkages for free movement through full travel and confirm that steering endpoints are set to avoid end-of-travel binding.

Does the kit include fasteners?

The kit includes the three alloy steering pieces with bearings; retain original fasteners where specified or use correct-size hex screws when attaching the assembly.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved