Carbon Lower Brace for LAZER ZX7.5 Chassis - Kyosho LAW85  [KY-LAW85]

Kyosho LAW85 - Carbon Lower Brace Set (ZX7.5)
Price:
£0.00
Brand:
Kyosho
Model:
KY-LAW85
GTIN:
4548565524549
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Lower carbon brace tuned for ZX7.5

This carbon lower brace is a purpose-made replacement for the LAZER ZX7.5 chassis, intended to boost stiffness in the lower section of the chassis without altering suspension geometry. It is a tuning component that helps refine torsional behavior and steering feedback for detailed setup work on carpet or tarmac circuits.

Installation is straightforward for anyone used to servicing 1/10 on-road cars: the brace replaces the original lower brace and mounts using the factory points. No motor, ESC, or electronic changes are necessary; always check clearance around the servo and underside parts before final tightening.

As a setup tool the brace creates measured differences: increasing lower-chassis stiffness can improve turn-in and reduce mid-corner chassis flex, making it easier to judge the effects of shock and swaybar adjustments.

Specifications

  • Item: Carbon lower brace set
  • Material: Carbon fiber
  • Model Number: LAW85
  • Compatibility: LAZER ZX7.5

Incorporate the brace into a controlled tuning plan, refitting compatible screws and confirming correct fit before competitive use.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this part compatible with my existing servo placement?

The brace uses the factory lower-brace mounting points, but because servo horns and aftermarket mounts vary, verify clearance after fitting to ensure there is no interference.

How should I maintain the carbon brace?

Inspect the brace after impacts for cracks or delamination and clean with a soft cloth; avoid harsh solvents that could affect any bonded surfaces.

Can I test setup changes with and without the brace?

Yes — run controlled laps before and after installation to compare handling differences and quantify how the brace alters feedback and turn-in response.

Will fitting the brace require chassis trimming?

In standard LAZER ZX7.5 layouts no trimming is required; if you have customised chassis components, check alignment and clearance carefully during installation.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved