Carbon Wishbone Inner Bushing - Serpent 601407 for SRX8GTR EC GP (SER600077)  [SER601407]

Precision carbon inner bushing

This Serpent 601407 carbon wishbone bushing is an internal component for front and rear wishbones that locates the inner pivot while preserving outer linkage geometry. Carbon construction yields a low-deflection contact surface for the wishbone pin and supports consistent alignment during dynamic loads.

Fitment: use where the kit specifies an internal wishbone bushing; compatibility is listed for SRX8GTR EC GP (SER600077). Verify the part number against your chassis before fitting.

Installation and maintenance notes: press or fit the bushing squarely into the wishbone bore until fully seated, check for smooth rotation around the wishbone pin, and inspect the surface after initial runs for abrasion. Replace worn bushings to prevent inner-pivot play and to retain correct toe and camber.

Tuning role: the insert governs pivot smoothness and positional repeatability rather than changing spring rate. Low-compliance carbon inserts sharpen turn-in and stabilise handling, while more compliant materials add slight forgiveness on uneven surfaces.