Destiny DF10059 - RX-10F 2.0 Precision Track Aluminum Steering Mount  [DES-DF10059]

Destiny DES-DF10059 RX-10F 2.0 Aluminum Steering Mount / Floating Servo Mount
Price:
£16.46
Brand:
Destiny
Model:
DES-DF10059
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Performance-Focused Mounting for Destiny DF10059 - RX-10F 2.0

The Destiny DF10059 steering and floating servo mount is made for the RX-10F 2.0 chassis, using aluminum to provide a firm, reliable anchor for your steering hardware. It aims to deliver consistent steering geometry and tougher wear resistance on the front end.

Consistent Steering and Reduced Play

With a focus on alignment and stiffness, the Destiny DF10059 cuts down on play in the steering system, improving predictability through corners. The floating servo style helps prevent binding and lowers friction for smoother control inputs during practice and race sessions.

Specifications

  • Material: Aluminum
  • Compatibility: Destiny RX-10F 2.0
  • Function: Steering Mount / Floating Servo Mount

Does this require modifications to the servo horn?

Most stock servo horns fit without change, but check for clearance around the floating mount. Minor trimming is uncommon but may be needed for oversized horns.

How does this affect steering maintenance?

The aluminum surface is low maintenance; periodically check fasteners and moving points of the floating assembly to ensure smooth operation and prevent loosening under race loads.

Is there an impact on front-end weight?

Aluminum is heavier than plastic alternatives, but the trade-off is improved stiffness. Consider this when balancing the car and setting up springs and anti-roll settings.

Can I paint or anodise this part?

Surface finishes are possible, but ensure any coating does not alter critical fit points. Light anodising or paint is fine if clearances are preserved.

Will this change servo calibration?

Calibration itself is unchanged, but you may need to re-centre or re-trim the servo after installation to account for any minor changes in linkage geometry.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved