EDS 160231 Precision Suspension Arm Reamer 1/8" (3.175mm) 120mm  [EDS-160231]

EDS 160231 - ARM REAMER 1/8inch (3.175MM) X 120MM
Price:
£7.13
Brand:
EDS
Model:
EDS-160231
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Precision Reaming with EDS 160231

The EDS 160231 Arm Reamer is aimed at modellers who demand accurate hole sizing in suspension parts. With a 1/8 inch (3.175mm) cutting diameter and a 120mm length, it supports careful setup and repair work.

Benefits for Setup and Repair

Reaming with the correct diameter reduces slop at joints and improves the seating of pivot hardware. The EDS 160231 helps you maintain consistent clearances for reliable handling.

Best Practices for Use

Secure components and advance the reamer in controlled passes, clearing debris as you go. This approach preserves part integrity and yields repeatable results across multiple arms.

Is the 3.175mm size standard for most pivot kits?

Many pivot kits use sizes around 3.175mm, but always double-check the part specs before reaming to avoid oversize holes.

How should I hold small arms while reaming?

Use a small vise or soft-jawed clamp to secure the arm and protect its shape, keeping it square to the reamer for clean cuts.

What signs show Ive gone too far reaming?

Excessive radial play or a visibly enlarged entry lip indicate over-reaming; stop and replace the arm if tolerance is lost.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved