EDS 181003 Chassis Droop Gauge Blocks 30mm for 1/8 Off-Road (2) [EDS-181003]

EDS 181003 - Chassis Droop Gauge Blocks 30mm For 1/8 Off-road - Lightweight (2)

Price:

£14.51

Brand:

EDS

Model:

EDS-181003

Condition:

Brand New

Quantity:

Write a review

Description
FAQ

Set Consistent 1/8 Off-Road Droop with EDS 181003

Serious hobbyists who tune 1/8 off-road cars will appreciate the EDS 181003 chassis droop gauge blocks for reliable droop measurement. The lightweight 30mm blocks are tailored to 1/8 scale layouts and make setup comparisons straightforward.

Why Measure Droop Regularly

Regular droop checks reveal how suspension changes alter handling and landing behaviour. The gauge blocks give you a baseline so you can experiment with spring rates and damping while keeping repeatable reference points.

Core Benefits

Precision Measurement: Provides consistent droop numbers to compare tuning iterations.
Lightweight Design: Small and simple to include in your pit kit without adding weight.
1/8 Scale Compatibility: Sized to match standard 1/8 off-road travel and chassis spacing.

How should I position the EDS 181003 blocks under the chassis?

Position a block beneath the chassis at the same reference point each time, typically near the shock tower or lower bulkhead, and adjust shocks until the chassis meets the block for a repeatable droop measure.

Will these blocks work with modified suspension travel?

They are ideal for standard 1/8 travel; if you run heavily modified travel you may need different block heights to get meaningful comparisons.

Do these need calibration before use?

No electronic calibration is required; just ensure the blocks are clean and use the same placement and procedure for consistent readings.

Hot Brands