Electric Slow-Flyer Prop APC AP1206SF 12x6 Replacement Blade for RC Models  [AP1206SF]

APC PROPELLER 12x6SF ELECTRIC SLOW FLYER
Price:
£3.83
Brand:
APC
Model:
AP1206SF
Condition:
Brand New
Write a review

Replacement blade APC AP1206SF for trainer and slow-flyer models

The APC AP1206SF propeller is a 12x6 replacement blade intended for electric slow-flyer and trainer RC aircraft. It matches models that specify a 12x6 diameter and pitch and is sold as a practical spare for maintenance or repair.

Installation uses the aircraft's existing prop adapter or nut together with the standard mounting hardware. Ensure the blade is seated correctly, fasten to the model manufacturer's recommended torque, and confirm correct rotation prior to flight.

In tuning, this prop delivers low-speed thrust where small changes in balance or blade condition will alter vibration and handling. Always check balance after fitting, secure mounting hardware, and perform a low-throttle ground check before flying.

Which models will accept this 12x6 blade?

Any electric slow-flyer or trainer that specifies a 12x6 prop should accept the APC AP1206SF, provided the motor shaft and adapter are compatible with the blade's hub.

What adapter details should I check before fitting?

Confirm your motor shaft diameter and the adapter bore size match, inspect the adapter for wear, and only use an adapter or nut that provides a snug, concentric fit to avoid runout.

How often should I replace the propeller?

Replace the blade if you notice chips, cracks, persistent imbalance, or after an impact. Regular inspection will indicate when a new APC AP1206SF is required to maintain safe flight characteristics.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved