Embla EB Rudder Servo Spacer HI0304139 Compatible with Embla EB by Hirobo  [HI0304139]

Embla EB Servo Spacer Overview

This rudder servo spacer is an RC accessory intended for the Embla EB tail assembly and is listed under Hirobo model HI0304139. It provides a compact method to correct servo alignment and the axial gap between the tail servo and linkage when using the factory tail configuration on Embla EB machines.

Compatibility: specified for Embla EB series tail servo installations. Fit this spacer where the servo-to-tailframe clearance requires a shim to maintain straight linkage geometry. Do not fit to other tail assemblies unless the mounting pattern and clearances are confirmed compatible.

Installation notes: isolate power and secure the airframe before fitting. Insert the spacer between the servo case and the bulkhead or mounting bracket as required to achieve correct linkage alignment. Use the existing mounting bolts and the original torque practice, then check full travel and clearance before flying.

Role in setup: the spacer functions as a fitment aid rather than a tuning device. By stabilising tail geometry it helps ensure transmitter endpoint and trim adjustments give repeatable tail control.