Factory Pro FP-O-3CK001 Graphite Conversion for 3racing Cero Sport 64  [FP-O-3CK001]

Price:
£47.70
Brand:
Factory Pro
Model:
FP-O-3CK001
Condition:
Brand New
Write a review

Factory Pro Graphite Conversion for 3racing Cero Sport 64

If you run a 3racing Cero Sport 64 Kit and want tighter handling, the Factory Pro FP-O-3CK001 Graphite Conversion Kit replaces stock pieces with engineered graphite parts to improve torsional stiffness and reduce mass for more precise control.

Why Fit Graphite Upgrades

Graphite is chosen for its stiffness and low weight, which helps reduce chassis flex and delivers sharper feedback at the wheel. Those traits assist drivers aiming for predictable behaviour at speed.

Practical Installation Advice

Fit the Factory Pro kit using correct torque settings and confirm all linkages move freely after assembly. A short break-in run followed by a hardware check will catch any issues early.

Will the conversion affect my shock settings?

Yes, a stiffer chassis often changes load transfer, so you may need to adjust shock damping or spring rates to regain balance after fitting the FP-O-3CK001.

Can I fit the graphite parts myself?

Most hobbyists with basic RC experience can install the kit. Work methodically, keep fasteners organised and follow alignment checks during assembly.

Does the kit change vehicle weight distribution?

Weight changes are usually minor, but because graphite reduces flex, the perceived balance can shift. Re-evaluate trim and ballasts if precise distribution is required.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved