Factory Pro FP-O-DB3228B Replacement 76T/228 Drive Belt for RX-10F 3.0  [FP-O-DB3228B]

Price:
£9.63
Brand:
Factory Pro
Model:
FP-O-DB3228B
Condition:
Brand New
Write a review

Replacement belt for RX-10F 3.0

The Factory Pro FP-O-DB3228B Long Life Drive Belt fits the RX-10F 3.0 and uses a 76T/228 tooth configuration to maintain steady power transfer. It is produced to withstand normal hobby and competition running.

Compatibility overview

This 76T/228 belt is matched to RX-10F 3.0 drive geometry as a direct substitute for worn belts. Robust materials help ensure consistency and reduce the need for frequent replacements.

Practical installation advice

Ensure correct belt tension and alignment to avoid slippage and uneven wear. Re-check tension after a short initial run and inspect periodically for tooth damage or fraying.

How do I check belt alignment quickly?

Rotate the drivetrain slowly by hand and watch pulley tracking. Misalignment shows as lateral movement or uneven contact; correct pulley positions before running at speed.

What causes premature belt wear?

Common causes are poor tension, worn pulleys, contamination with oils or debris, and repeated overheating. Addressing these factors will extend belt life.

Is this belt suitable for competitive events?

Yes, when installed correctly and inspected regularly the belt performs well in competition. Keep spares and check pulleys and tension between heats to avoid failures.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved