Factory Pro FP-O-SCP037R Schumacher FT9 Graphite Steering Hub Plate Front Right 1pc  [FP-O-SCP037R]

Price:
£6.58
Brand:
Factory Pro
Model:
FP-O-SCP037R
Condition:
Brand New
Write a review

Stiffen the Front End with Factory Pro FP-O-SCP037R

The Factory Pro FP-O-SCP037R steering hub plate stiffens the steering assembly on the Schumacher FT9 to improve control and predictability. Its graphite construction balances strength and lightness for refined front-end dynamics.

Why Use Graphite for the Steering Hub

Graphite gives a high stiffness-per-weight ratio that helps cut down unwanted movement in the steering components. That reduced flex helps maintain steering precision under lateral loads and during quick corrections.

Compatibility and Installation Notes

Designed to match the Schumacher FT9 mounting pattern, this plate installs without altering the chassis. Fit it using the existing hardware and double-check screw tensions for a secure mounting.

Will this plate work with stock FT9 steering parts?

Yes, the FP-O-SCP037R is intended to replace the stock front hub plate on the Schumacher FT9 and uses the same mounting points for straightforward replacement.

Does graphite require different maintenance than plastic?

Routine checks are similar: keep the plate free of debris and inspect for hairline cracks after impacts. Tighten fasteners to the correct torque to avoid stress concentrations.

Should I change setup after fitting this upgrade?

Minor setup tweaks such as toe or caster adjustments may be beneficial to suit the firmer steering characteristics. Make incremental changes and test to find the best balance.

Is the FP-O-SCP037R prone to cracking?

While graphite is strong and light, it can crack under severe impact. Inspect after heavy collisions and replace the plate if you spot any fractures to maintain safe handling.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved