Ferrari FXX Lightweight Painted 1/10 On-Road Body Set Tamiya 51260  [51260]

Tamiya 51260 - Ferrari FXX Lightweight Body Finish SP-1260
Price:
£35.11
Brand:
Tamiya
Model:
51260
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Ready-finished Ferrari FXX 1/10 body shell

This item is a finished, pre-painted Ferrari FXX 1/10-scale body manufactured by Tamiya, delivered as a lightweight polycarbonate shell with the paint and decals applied at the factory. It is designed as a spare or cosmetic upgrade for scale on-road RC cars, reducing the time needed for finishing work.

The body is shaped for realistic appearance and prepared for standard trimming to suit common 1/10 on-road platforms. Be aware that short wheelbase or wide tread chassis may need additional measurement and trimming for correct mounting and clearance.

Specifications

  • Item Tamiya 51260 - Ferrari FXX Lightweight Body Finish SP-1260
  • Material Lightweight polycarbonate
  • Model Number 51260
  • Compatibility 1/10 on-road chassis fitting standard wheelbase and tread layouts

Compatibility

  • TA05
  • TA04
  • TT-01
  • TGS
  • TNS
  • TB-02
  • TB-01
  • TL-01
  • TB Evolution IV
  • TRF415
  • TG10-Mk.1

Confirm body post alignment and tyre clearance on chassis outside the standard layouts before final mounting to avoid interference.

As a completed spare body, this product offers a quick visual refresh and lightweight replacement for on-road scale models; always check compatibility and trim progressively for non-standard chassis.

Is this compatible with TRF415 without modification?

TRF415 appears in the compatibility list, but you should test-fit the body to confirm post spacing and wheel clearance; minor trimming or different mounting positions may be necessary.

Can I repaint this finished shell for a custom livery?

Yes, repainting is possible. Use paints formulated for polycarbonate and mask carefully to preserve other painted areas and decals where desired.

How should I check for wheel clearance?

Fit wheels and tyres to the chassis, lower the shell into position, and rotate the wheels slowly to verify there is no rubbing at full lock and full suspension droop before trimming.

Are any reinforcements recommended for track use?

For competitive track use, consider strengthening mounting areas with small washers or tape under the posts to distribute load, while avoiding rigid additions that could transfer impact forces.

What trimming tools are best for a neat finish?

A combination of a fine scissors, hobby knife for detail, and a plastic reamer for arches gives the cleanest results; finish edges with a fine file if necessary.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved