For Mini-Z MR-04: MR04W-MM McLaren P1 GTR Replacement Body MZP260YG by Kyosho  [KY-MZP260YG]

MR-04 scale body in pre-painted finish

The Kyosho MZP260YG is an ASC-style, pre-painted Yellow/Green replacement body intended for Mini-Z MR-04 cars. It provides the external styling and mounting points only and does not include chassis, radio gear, motor, or drive components.

The MR04W-MM code in the product title denotes the chassis variants this shell is intended to match; confirm your MR-04 model and post spacing before purchasing. Painted bodies can vary in tab positions or wheel opening dimensions and may require slight trimming or differing mount hardware on some MR-04 versions.

Typical fitting involves locating the body posts over the MR-04 mounts and securing with the chassis clips or screws you already use. If the shell interferes with internal parts such as the servo or ESC, address the obstruction with careful trimming around tabs or wells rather than forcing installation.

This shell is useful for visual setup and small-scale aerodynamic checks, allowing evaluation of stance and balance at the Mini-Z scale. Remember that aerodynamic influences at this size are limited relative to full-size cars.

Opt for this MZP260YG if you want a completed McLaren P1 GTR style exterior for MR-04 compatible Mini-Z cars, and always confirm fitment with your specific MR-04 variant before final mounting.