Cero Series Steering Knuckle Graphite Reinforcement for 3racing - Factory Pro O-3CP002  [FP-O-3CP002]

Graphite knuckle plate tailored for Cero Series

This graphite knuckle plate is an RC steering component made for the 3racing Cero Series and comes as a pair (2 pcs). It replaces the original knuckle plate to offer a stiffer mounting point for steering links, helping to reduce flex under heavy steering effort.

Confirm compatibility with your specific 3racing Cero Series chassis before fitting. The plate is intended solely for hobby RC vehicles and not for real-world use.

Fitting is simple for anyone used to working on steering geometry: remove the original knuckle plate, keep original fasteners if they fit, and install the graphite plate in the same position. Use the proper hex driver and check steering travel after assembly to ensure there is no binding.

Setup tip: installing a graphite knuckle plate increases local stiffness at the steering pivot, producing crisper steering feedback and improved stability during aggressive inputs. Make measured adjustments to toe and steering link lengths to fine tune handling without altering primary suspension elements.