Front Coil Spring YOKBMS1270 for R/C General Suspension by Yokomo  [YOKBMS1270]

Yokomo BMS-1270 - Front Shock Spring 1270
Price:
£6.99
Brand:
Yokomo
Model:
YOKBMS1270
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Spring selection and setup

The YOKBMS1270 front shock coil spring is intended for RC front suspension applications as a replacement or tuning option. It enables changes to spring stiffness without needing to alter damper housings or shafts.

Role during setup: use spring swaps or preload adjustments to control front roll, responsiveness and weight transfer. Coordinate spring choice with damper oil and ride height for stable on-track behavior.

Installation guidance: fit the spring onto the shock shaft and seat it at the perch, verify equal seating on both sides, and ensure no binding against the shock body. Use matched left/right springs and recheck preload after a shakedown run.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Check your shock length and spring perch spacing against the spring dimensions. If those match typical R/C General configurations, the spring should install without modification.
Altering spring rate changes roll stiffness and how the car transfers weight in corners. Use incremental swaps to observe handling shifts and pair changes with damper tuning for best results.
After fitting, confirm even spring seating, check for scrubbing on the shock body, and verify preload and ride height. Re-test on track and make small adjustments as needed.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved