Front Green Shock Spring 13mm, 4lbs - Serpent 500910  [SER500910]

Price:
£0.00
Brand:
Serpent
Model:
SER500910
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Front shock spring: compact 13mm, 4lbs

The Serpent 500910 shock spring is a compact front coil for R/C shocks, featuring a 13mm active length and a 4lbs spring rate finished in green. It is intended as a direct replacement for short-sprung setups that need firmer front support or refined weight transfer control on smaller models.

Fitting involves standard shock disassembly: remove cap and shaft, slide the spring over the shaft onto the retainer, and reassemble while checking preload and clearance. Verify inner diameter and retainer compatibility to prevent binding during operation.

In tuning terms, a front-mounted 4lbs spring provides stronger initial support and increased roll stiffness; use it to correct front under-support but coordinate with damping and rear spring choices for a balanced setup.

Measure the shock shaft and inner diameter, inspect retainer style, and ensure the Serpent 500910 seats correctly without binding for safe operation.
A 4lbs front spring stiffens initial response and roll control; adjust damping and rear spring rates as needed to preserve balanced handling rather than relying on a single change.
Yes. Rebound should be checked after fitting because the increased spring force can change the required rebound to maintain contact and prevent pogo or excessive oscillation.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved