Front Shock Spring (Black) Compatible with Off-Road Models - Yokomo YOKRP-083BK  [YOKRP-083BK]

Purpose-built front spring for handling adjustment

This front suspension spring is produced for scale off-road RC use and is supplied under the Yokomo YOKRP-083BK designation with a black finish as stated in the listing. It is intended as a direct swap for front shock springs, enabling ride and handling changes without replacing shock bodies or internal pistons.

Fitting follows normal coil-spring shock service: remove the shock cap or spring retainer, withdraw the existing spring, and slide on the replacement while ensuring the spring seat and retainer are properly positioned. Use standard shock servicing tools and observe common workshop safety when decompressing springs and working with disassembled shocks. Prior experience with shock maintenance on scale off-road models is assumed.

On the tuning side, the front spring chiefly affects ride height, initial compliance, and the front axle's reaction during load transfer. Combined with damping and preload adjustments, swapping springs is a straightforward way to tune front grip and steering balance on varied surfaces. Implement changes one at a time and record the results for easier comparison.

For care and checks, look for any bending or coating deterioration that could cause the spring to bind on the shock shaft or seat. Clean seating areas and confirm retainers and collars are correctly secured after reassembly. Verify that spring length and seat style match your shock assembly before completing installation.