Front Shock Tower in 2.5mm Carbon for NT1 2027 - 2 pcs - XRAY 332086  [XR-332086]

XRAY 332086 - Carbon Shock Tower Front - 2 Positions - 2 Pcs
Price:
£16.81
Brand:
XRAY
Model:
XR-332086
Condition:
Brand New
Write a review

Front Shock Tower in 2.5mm Carbon for NT1 2027

This front shock tower is machined from 2.5mm carbon fibre plate and offers multiple upper shock mounting holes to widen your setup options. The sculpted wave profile increases compliance at the front, allowing the suspension to better absorb irregularities and subtly altering the handling balance without changing other hardware.

The tower is intended for NT1 2027 assemblies that accept a front shock tower designed for aluminium bulkheads. It is supplied as a pair to replace both left and right mounts.

Fitting notes: ensure your aluminium bulkheads accept a direct replacement plate and that the mounting hole pattern aligns before tightening. Use the same screw types and torque settings as the original components to avoid creating stress points in the carbon. Employ different upper positions to refine ride height and shock inclination as part of balance tuning rather than immediately changing spring rates or damper viscosity.

Specifications

  • Item Front Carbon Shock Tower
  • Material Carbon fiber
  • Model Number 332086
  • Compatibility NT1 2027
  • Thickness 2.5mm
  • Quantity 2 pcs

Use this tower when you require stable, repeatable front-end adjustments through upper-mount changes and a direct fit to aluminium bulkheads on NT1 2027 chassis.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this replace the stock NT1 2027 front tower without modification?

It is designed as a direct replacement for towers that mount to aluminium bulkheads, but you should inspect hole locations on your chassis to confirm a no-mod fit prior to final installation.

What thickness and finish should I expect?

Expect a 2.5mm carbon fibre plate, CNC-machined with a clean edge finish typical of precision cut carbon components.

Will changing the upper mount position require other setup changes?

Altering shock angle affects geometry and load transfer, so you may need minor suspension tweaks to retain your preferred handling balance after moving the mount.

Are mounting bolts supplied with this part?

The part listing includes only the carbon tower pair; check your existing hardware for compatibility or fitment before installation.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved