6EXAP Futaba 6-Channel PCM 35Mhz/ R146IP [6EXAP_c10]

Price:

£101.16

Brand:

Futaba

Model:

6EXAP_c10

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

Futaba has released 6-Channel PCM 35Mhz/ R146IP under Flight Transmitters System category

FEATURES:

Aileron, Elevator and Rudder dual price switch - utilize this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are arranged you decide on, but most of the time, after the switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if utilized).
Flap control dial/Channel 6 - This dial runs the servo attached to channel 6 in to the receiver in case the model has flaps here is the control useful to run them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to go the fundamental or center host to every servo as labeled into the diagram.
Asking jack - Port for asking the transmitter batteries using the included electric batteries charger.
On-off switch
INFORMATION INPUT lever - always change the values from the different functions exhibited regarding LCD screen.
Liquid-crystal display (LCD) - shows programming modes and values joined up with with.
MODE key - always scroll through and show the ten or eleven(PCM) various functions.
SELECT key - accustomed show the values the current function.
Throttle-cut switch - to work well with the throttle-cut function, reduced the throttle stick entirely, then drive the throttle-cut key to completely shut the carburetor and shut with this motor.
Throttle/rudder control stick - operates the servos associated with channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - Operates the trainer functions. To have outcomes as a trainer switch the transmitter should really be linked to another transmitter via. a trainer cable (available separately).
Retractable landing gear switch/Channel 5 - modification operates the servo related to channel 5 in receiver should your model has retractable landing gear here is the control always expand and retract kit.
Antenna - Radiates signals towards the receiver. Don't ever travel a model without completely expanding the antenna or perhaps you might create disturbance to numerous other modelers and decrease functional indication variety of the transmitter. The antenna could be eradicated and changed with another in the case it really is inadvertently broken.

Hot Brands

6EXAP Futaba 6-Channel PCM 35Mhz/ R146IP [6EXAP_c10]