6EXAP Futaba 6-Channel PCM 40Mhz/ R136HP/ 4xS3003 [6EXAP_c8]

Price:

£150.54

Brand:

Futaba

Model:

6EXAP_c8

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

Futaba has released 6-Channel PCM 40Mhz/ R136HP/ 4xS3003 under Flight Transmitters System category

QUALITIES:

Aileron, Elevator and Rudder twin cost switch - make use of this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses is initiated you choose, but broadly speaking, when the switch is ��up�� the throws are greater (��high rate��) and when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential costs (if used).
Flap control dial/Channel 6 - This dial operates the servo connected to channel 6 in the receiver in case the model has flaps this is actually the control employed to work them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to go the fundamental or center host to every servo as labeled in the diagram.
Charging you jack - Port for recharging you the transmitter batteries utilising the included battery power charger.
On-off switch
INFORMATION INPUT lever - frequently change the values connected with various functions shown regarding LCD screen.
Liquid-crystal display (LCD) - Displays programming modes and values joined up with.
MODE key - accustomed scroll through and show the ten or eleven(PCM) different functions.
PICK key - regularly reveal the values the existing function.
Throttle-cut switch - to make use of the throttle-cut function, lower the throttle stick completely, then drive the throttle-cut modification to completely shut the carburetor and shut of motor.
Throttle/rudder control stick - runs the servos attached to channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - Operates the trainer functions. To get outcomes as a trainer switch the transmitter must certanly be attached with another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - change operates the servo connected with channel 5 inside receiver if model has retractable landing gear here is the control accustomed expand and retract the apparatus.
Antenna - Radiates signals towards receiver. Never ever fly a model without completely expanding the antenna or you could produce disturbance as well as other modelers and decrease practical indication selection of the transmitter. The antenna might be eliminated and changed with another whenever it is accidentally broken.

Hot Brands

6EXAP Futaba 6-Channel PCM 40Mhz/ R136HP/ 4xS3003 [6EXAP_c8]