6EXAP Futaba 6-Channel PCM 72Mhz/ R136HP/ 4xS3003 [6EXAP_c9]

Price:

£150.54

Brand:

Futaba

Model:

6EXAP_c9

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

Futaba has released 6-Channel PCM 72Mhz/ R136HP/ 4xS3003 under Flight Transmitters System category

QUALITIES:

Aileron, Elevator and Rudder twin expense switch - benefit from this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses is setup you select, but generally, whenever switch is ��up�� the throws are greater (��high rate��) proper the switch is ��down�� the throws are less (��low rate��). This switch moreover flips between exponential rates (if used).
Flap control dial/Channel 6 - This dial runs the servo connected with channel 6 inside receiver whenever the model has flaps here is the control used to work them.Aileron/elevator control stick -Mounting point for optional neck band.
Trim levers (all) -Used to go the basic or center place of each servo as labeled in to the diagram.
Charging you jack - Port for asking the transmitter batteries using the included battery pack charger.
On-off switch
DATA INPUT lever - accustomed change the values of numerous functions shown in LCD display.
Liquid-crystal display (LCD) - Displays programming modes and values joined up with.
MODE key - constantly scroll through and show the ten or eleven(PCM) various functions.
SELECT key - frequently reveal the values for the present function.
Throttle-cut key - to work with the throttle-cut function, lower the throttle stick completely, then drive the throttle-cut key to completely shut the carburetor and shut for the motor.
Throttle/rudder control stick - Operates the servos associated with channel 3 (throttle) and channel 4 (rudder) in the receiver.
Trainer switch - operates the trainer functions. To utilize as a trainer switch the transmitter should be connected with another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - Switch runs the servo associated with channel 5 in receiver if for example the model has retractable landing gear this is actually the control constantly expand and retract the gear.
Antenna - Radiates signals toward receiver. Don't ever travel a model without totally expanding the antenna or you may produce disturbance to numerous other modelers and decrease operational indication selection of the transmitter. The antenna might removed and changed with another in the event its inadvertently broken.

Hot Brands

6EXAP Futaba 6-Channel PCM 72Mhz/ R136HP/ 4xS3003 [6EXAP_c9]