Futaba 6EXAP_c5 6-Channel 35MHz FM Flight Transmitter for Airplanes & Helicopters  [6EXAP_c5]

Price:
£110.64
Brand:
Futaba
Model:
6EXAP_c5
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Practical six-channel FM radio for pilots

The Futaba 6EXAP_c5 is a six-channel FM transmitter package engineered for model airplane and helicopter pilots operating on 35MHz. It highlights physical controls and straightforward switch placement so pilots can quickly set trims, dual rates and function dials, and it ships with a receiver and servos to simplify initial installation and setup.

Ergonomics are arranged for on-field operation: an aileron/elevator dual-rate switch that also flips exponential settings, a dedicated flap dial assigned to channel 6, a retractable landing-gear switch on channel 5, and a throttle/rudder stick layout with a throttle-cut button to stop the engine. Full-axis trims are provided, and a DATA INPUT lever with MODE and SELECT keys navigate the LCD for programming and checking values.

Installation is simple: position the included R136F receiver in the airframe following manufacturer guidance, connect the four S3003 servos into their channels, fully extend and route the antenna for reliable signal transmission, and use the charging jack with the supplied charger to prepare the transmitter battery before flying. The trainer switch supports instructor takeover when paired with a second transmitter using a trainer cable sold separately.

Specifications

  • Item Futaba 6EXAP 6-Channel FM transmitter set
  • Material Electronic components and molded transmitter case
  • Model Number 6EXAP_c5
  • Compatibility Airplane and helicopter RC models using 35MHz receivers, includes R136F
  • Channels 6 channels with dedicated controls for flaps (ch6), gear (ch5), throttle (ch3), rudder (ch4)
  • Includes R136F receiver, 4 pcs S3003 servos, transmitter battery charger
  • Display Liquid-crystal display for programming and values

For flyers needing a user-friendly, field-oriented six-channel FM setup, the Futaba 6EXAP_c5 supplies tactile switches for trim and dual-rate control along with the receiver and servos required to mount and tune a sport or scale model swiftly.

Are servos and charger part of the 6EXAP_c5 package?

Yes. The package includes four S3003 servos and a transmitter battery charger along with the Futaba R136F receiver and the 6EXAP_c5 transmitter.

Which procedure ensures reliable dual-rate tuning?

Set initial low-rate values for safe ground or hover checks, then increase to high-rate incrementally while observing control response; use exponential to smooth transitions if required.

What channels handle flaps and retracts by default?

By default the flap dial controls channel 6 and the landing gear switch operates channel 5; verify servo directions and throws during bench setup before flying.

How is the throttle-cut function typically tested?

Test the throttle-cut on the ground by lowering the throttle fully and activating the cut button to confirm the engine or motor stops as intended without affecting other controls.

Can I use the trainer feature to teach students?

Yes. When connected to a second transmitter using a trainer cable (sold separately), the trainer switch lets an instructor assume control as necessary.

Best practises for antenna and battery handling?

Extend the antenna fully and position it away from power sources for consistent reception, and use the supplied charger to maintain the transmitter battery charged ahead of flying sessions.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved