Futaba 6EXAP_c9 6-Channel PCM 72MHz Radio Transmitter for Aircraft and Helicopters  [6EXAP_c9]

Price:
£143.23
Brand:
Futaba
Model:
6EXAP_c9
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Futaba 6EXAP_c9 Technical Outline

The Futaba 6EXAP_c9 is a 6-channel PCM radio system intended for model aircraft and helicopters operating on 72MHz. It emphasises practical, field-oriented control layouts with labelled switches and dials to handle common adjustments such as dual-rate selection, flap travel and retractable gear. Key user controls include a flap dial on CH6, a retract switch for CH5, separate trim levers, a throttle-cut button and a DATA INPUT lever paired with an LCD for menu navigation.

Installation follows standard radio procedures: bind the supplied R136HP receiver to the Futaba 6EXAP_c9, connect servos to the corresponding receiver channels (four S3003 servos are included in the set), and confirm servo direction and travel using trims and the dual-rate switch. Ensure the transmitter antenna is fully extended for reliable 72MHz operation. To activate trainer mode, link this transmitter to a second radio using a trainer cord as noted in the controls documentation.

Specifications

  • Item Futaba 6EXAP 6-Channel PCM 72MHz transmitter set
  • Model Number 6EXAP_c9
  • Channels 6
  • Frequency 72MHz PCM
  • Receiver R136HP
  • Included servos 4x S3003
  • Display LCD screen for programming and values
  • Key functions Dual rate switches, flap dial (CH6), retract switch (CH5), throttle cut, trainer
  • Material Not specified

Compatibility

  • Suitable for RC aeroplanes and helicopters that use 72MHz PCM receivers.

The Futaba 6EXAP_c9 combines a compact transmitter package with accessible controls to reduce preflight menu work, making it suitable for pilots needing quick rate, flap and trainer adjustments at the flying field.

Which parts are delivered with the Futaba 6EXAP_c9 set?

The set supplies the Futaba 6EXAP transmitter, an R136HP receiver, four S3003 servos and the transmitter battery charger.

Will this transmitter work with my 72MHz model?

It will operate with models using 72MHz PCM receivers; check that your aircraft wiring and servo connectors align with the receiver channel assignments before completing installation.

How is the throttle-cut configured and used?

Set the throttle stick to idle and press the throttle-cut button to remove throttle output as configured between the transmitter, receiver and the model's engine or ESC system.

Do I need a special cord for trainer mode?

Trainer mode requires a trainer cord to connect to the instructor transmitter; confirm the instructor radio supports the same trainer wiring and source the cord if it is not supplied.

How should I verify servo directions and endpoints?

After connecting servos to the R136HP, use the Futaba 6EXAP_c9 trim levers and dual-rate switch to check and set correct directions and endpoint travel prior to flight.

What charging method is recommended for the transmitter battery?

Use the supplied charger and the transmitter charging jack, and follow the standard charging safety guidance appropriate for the battery type provided with the radio set.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved