Futaba CIU_2 USB Interface and Programming Lead for MC401CR MC601 MC850C GY520 [CIU_2]

Futaba CIU-2 / USB Interface For MC401CR/MC601/MC850C

Price:

£27.89

Brand:

Futaba

Model:

CIU_2

Condition:

Brand New

Quantity:

Write a review

Description
FAQ

Desktop USB adapter for Futaba ESC and gyro tuning

The Futaba CIU_2 establishes a USB connection between a Windows PC and supported Futaba speed controllers and gyros to manage configuration and parameter files. It serves as an RC programming accessory to inspect, adjust, and archive settings for MC401CR, MC601 and MC850C ESCs and the GY520 gyro.

Physical hookup is convenient: the CIU_2 ships with a USB plug and a 19.7in extension cable so you can reach electronics in standard 1/10 - 1/8 scale car installations. The unit draws standard USB bus power and operates with Futaba's configuration utilities on the Windows versions listed below.

The device concentrates on offering access to tuning and configuration parameters rather than acting as an operational control device. Adjustable parameters include the variable frequency range, low battery cut, current limiter options, brake maximum duty and neutral brake settings. A logging function permits reading saved logs and erasing them where supported by firmware.

System requirements: PC running Windows Vista, Windows XP, or Windows 2000 with an available USB port. Confirm that your Futaba configuration software supports these OS versions before using the CIU_2.

Specifications

Item: USB interface for programming Futaba ESC and gyro
Model Number: CIU_2
Compatibility: MC401CR, MC601, MC850C, GY520
Operating Voltage: 5V +/- 0.2V (typical USB bus power)
Variable Frequency Range: 100Hz - 10KHz
Low Battery Voltage Protection: 2.5V - 6.0V
Current Limiter: 50A, 300A, cancel
Brake MAX Duty: 0% - 100%
Neutral Brake: 0 - 100%
Current Draw (idle): 12.3mA +/- 2mA
Dimensions: 0.72 x 2.20 x 0.35 in
Weight: 0.26 oz
Included Cable: USB connector with 19.7in extension

Compatibility

MC401CR
MC601
MC850C
GY520

Employ the CIU_2 when you require a reliable USB bridge to configure and log parameters on supported Futaba ESCs and the GY520 gyro, suitable for workshop setup or laptop use trackside.

Are MC401CR, MC601 and MC850C supported by this interface?

Yes. The CIU_2 supports MC401CR, MC601 and MC850C speed controllers as well as the GY520 gyro. Use the appropriate Futaba configuration application for each device.

Which operating systems will work with the CIU_2?

The interface is compatible with Windows Vista, Windows XP, and Windows 2000. Ensure the Futaba configuration software you plan to use is designed for one of these OS versions.

Does the CIU_2 act as a power source for the ESC?

No. The CIU_2 draws about 5V from the USB bus to power its electronics. It should not be expected to power the ESC or motor; the ESC requires its own battery for motor operation.

What tuning and logging capabilities are exposed via the CIU_2?

Using the Futaba configuration tool with the CIU_2 you can change frequency settings, low battery cut values, current limiter mode, brake limits and neutral brake. The tool also allows reading and clearing logs if the ESC firmware exposes those features.

Hot Brands