Futaba FUSHORN-G 4pc Type-G Large-Circle Servo Horns D6mm (w/o screws)  [FUSHORN-G]

Details for the FUSHORN-G Type-G horn

The Futaba FUSHORN-G collection includes four Type-G large-circle servo horns tailored to D6mm output shafts and is supplied without mounting hardware. These horns are suitable as replacement parts or spares where a Type-G profile is specified.

Fitting is achieved by seating the horn on the servo output spline so the large-circle aperture engages properly, then fastening with the servo's original screw or an appropriate substitute (not included). Always check alignment and free movement across the horn's travel prior to final tightening to prevent binding.

Using a large-circle Type-G horn can affect linkage geometry and mechanical advantage relative to smaller horns. When tuning steering or throttle linkages, position the horn near neutral, verify travel limits, and make transmitter endpoint adjustments to fine-tune response.

Contents: four Type-G large-circle servo horns. No screws or additional fittings are provided. Intended for RC hobby maintenance and minor tuning tasks.