GF01/TA Front Steering King Pin Set 5mmx6.2mm XM4 GF004 by GPM  [GF004]

Tamiya GF01 Aluminium King Pin (5mmx6.2mmXM4) - 4pcs (For GF01 / TA01 / TA02 / TA03 / TL01) - GPM GF004
Price:
£2.59
Brand:
GPM
Model:
GF004
GTIN:
4894538067132
Condition:
Brand New
Write a review

Precision 5mmx6.2mm XM4 King Pins for GF01 and TA Platforms

These aftermarket aluminium king pins are produced to 5mmx6.2mm XM4 dimensions and supplied as a set of four for Tamiya GF01 and the related TA/TL series. They are intended for hinge or knuckle connections in the front steering arrangement.

The king pin acts as the pivot between the steering knuckle and hub carrier and is a common service item. Aluminium offers greater resistance to bending under stress than softer materials while keeping weight low to preserve handling characteristics.

Installation is straightforward; check mating bearings and sleeves for wear and fit the pins with the existing mounting hardware. After assembly, confirm the steering moves freely through its full arc and replace any worn ancillary parts to retain correct steering geometry.

Compatible Models

  • GF01
  • TA01
  • TA02
  • TA03
  • TL01

Does the set include all pins for the front end?

Yes, the package contains four king pins suitable for the front steering knuckles of the listed compatible models.

Will aluminium pins change steering feel?

Aluminium may slightly alter flex characteristics compared with softer stock pins, typically providing firmer resistance to bending without significant weight penalty.

Any recommended maintenance after fitting?

Regularly check for play, clear grit from the steering joint, and inspect sleeves and retainers; replacing worn parts alongside the pins ensures long service life.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved