GF01/TA/TL Steel King Pin 5mmx6.2mm XM4 4pcs GF004SB by GPM  [GF004SB]

Tamiya GF01 Steel King Pin (5mmx6.2mmXM4) - 4pcs (For GF01 / TA01 / TA02 / TA03 / TL01) - GPM GF004SB
Price:
£1.41
Brand:
GPM
Model:
GF004SB
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Aftermarket steel king pins for GF01 lineup

This aftermarket set supplies direct-fit steel king pins for Tamiya GF01-derived chassis, restoring worn steering pivot points on 1/10 scale models. The kit includes 4pcs in the stated 5mmx6.2mm XM4 size to re-establish firm pivoting where the originals have worn or failed.

Installation notes: these pins work at steering knuckle and suspension pivot joints on compatible Tamiya models, giving a hardened contact surface when stock pins show play. Confirm bore condition and ensure correct seating to prevent unwanted steering play after assembly.

Care advice: inspect knuckle bores and bearings before refit, verify smooth steering movement without binding, and renew any degraded companion hardware. Designed for model repair and tuning applications.

Compatible Models

  • GF01
  • TA01
  • TA02
  • TA03
  • TL01

Do these pins fit TL01 without modification?

They are listed as compatible with TL01 and other models in the compatibility box; verify bore condition and clearances before final fitting.

What finish do these pins have?

These are steel pins intended for strength; inspect surface finish on receipt and consider light corrosion protection if operating in wet environments.

Can these pins be used for tuning upgrades?

Yes, they are suitable for repair and tuning where a harder pivot surface is required, but ensure all mating parts are serviceable to gain the full benefit.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved