GPM Tamiya CC-01 Aluminium Centre Gearbox Mount CC038M - Replacement Part  [CC038M]

Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M
Price:
£13.31
Brand:
GPM
Model:
CC038M
GTIN:
4894538030914
Condition:
Brand New
Write a review
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"

Centre gearbox bracket for CC-01 upgrades

This aluminium alloy centre gearbox mount is supplied as a single set and is designed for the Tamiya CC-01 chassis, model CC038M. It positions and secures the centre gearbox to improve drivetrain alignment and add chassis stiffness while retaining the original gearbox layout.

Replacing the stock plastic bracket with this metal unit reduces flex at the gearbox interface and is intended to fit standard CC-01 assembly points and screw patterns for a straightforward installation.

Following installation, recheck gear mesh and driveline angles and confirm motor and spur clearance. Small changes to shims or screw torque are commonly used to fine-tune engagement and eliminate drivetrain noise.

Specifications

  • Item: Alloy center gear box mount
  • Material: Aluminum alloy
  • Model Number: CC038M
  • Compatibility: Tamiya CC-01

A practical upgrade for anyone looking to firm up the gearbox attachment on a CC-01; fit carefully and verify alignment after installation.

This item is compatible with

  • TAMIYA CC01

Will this mount fit without drilling?

In typical CC-01 builds it fits the existing mounting points, so no drilling should be required unless your chassis has been modified.

What benefit does the alloy give?

The aluminium alloy reduces flex compared to plastic, which helps keep consistent gear mesh under load.

Should I change the gearbox screws?

Standard CC-01 screws are usually fine, but check screw length and thread engagement to avoid interference with internal parts.

How to check driveline angles?

With the car on stands rotate the driveline and inspect for binding; adjust shims and motor mount as needed until rotation is smooth.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved