GPM TRAXXAS MAXX 12mm Brass Wheel Hex Adapter Set TRX4010X/12M - Replacement Part  [TRX4010X/12M]

Brass 12mm Hex Adapters for TRAXXAS MAXX

This 12mm brass hex adapter kit fits TRAXXAS MAXX hubs and offers a tough, heavier adapter to improve wheel fitment and stance. Increasing hex thickness to 12mm helps with wheel engagement and widens track without contacting other drivetrain components when installed properly.

The kit contains the hardware required for a direct replacement of standard hexes and is intended as an aftermarket tuning option to alter vehicle stance and handling.

• Hex Adapter - 4 pcs
• Stainless Steel Screw Shaft M4x2.5x11.8 - 4 pcs
• Shims 5mm - 4 pcs
• 5mm Metal Washer - 4 pcs
• Stainless Steel Hex Socket Screw 11mm - 4 pcs

Fitting normally involves removing the stock hex, placing the brass adapter on the hub, and securing it with the supplied screws and washers. Apply the shims to achieve any required offset. The brass adds mass (approximately 7g per adapter as provided by the source) and the larger flange helps close visible wheel gap and marginally increase track width, which can change handling on loose terrain. The adapter is 12mm thick, specified as 7mm thicker than the original item.