GPM TRAXXAS X-MAXX/XRT Aluminium Gear Cover TXM038GC - Replacement Part  [TXM038GC]

TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC
Price:
£37.65
Brand:
GPM
Model:
TXM038GC
GTIN:
4894538237320
Condition:
Brand New
Write a review
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"
alt="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC" title="TRAXXAS 1/8 X-Maxx Aluminium Gear Cover - 1pc set - GPM TXM038GC"

Aftermarket Aluminium Gear Cover for TRAXXAS X-MAXX and XRT

This aluminium gear cover is a direct-replacement option for the original plastic cover on compatible TRAXXAS 1/5 and 1/6 vehicles. It helps protect the spur gear and adjacent gearbox area from stones, mud and incidental impact when running off-road.

Fit the cover using the supplied round head screws and inspect gear mesh and clearance before tightening to prevent contact with moving parts. The aluminium construction provides a firmer mounting surface than the stock plastic piece, which can aid drivetrain robustness under heavy use.

Packing includes

  • Gear cover - 1pcs
  • Round head screw 3x10 - 2pcs

Compatible Models

  • TRAXXAS-1/5 4WD X-MAXX 6S
  • TRAXXAS-1/6 4WD XRT 8S-78086-4

Opt for this aluminium cover when you require a robust, direct-replacement part for the listed TRAXXAS platforms; always confirm correct clearances during installation and secure with the supplied screws.

Which TRAXXAS models are supported?

Supported models are listed in the compatibility box; check those entries to confirm your chassis matches the mounting pattern.

Does the cover need periodic inspection?

Yes. Periodically clear debris, check fastener security and recheck gear mesh after heavy runs or collisions to ensure continued safe operation.

Will I need special tools to install?

Installation requires standard metric screwdrivers or hex drivers suitable for the supplied 3x10 round head screws; no specialised tools are normally needed.

Can this cover be used on customised gearboxes?

Custom gearbox or motor arrangements may require clearance checks; verify there is no contact with rotating parts before completing installation.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved