Traxxas X-MAXX Reinforced #45 Dogbone Set 3pcs TXM1160S/1 by GPM  [TXM1160S/1]

TRAXXAS X-MAXX Steel #45 Dogbone-3pc set - GPM TXM1160S/1
Price:
£9.68
Brand:
GPM
Model:
TXM1160S/1
GTIN:
4894538281705
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS X-MAXX Steel #45 Dogbone-3pc set - GPM TXM1160S/1" title="TRAXXAS X-MAXX Steel #45 Dogbone-3pc set - GPM TXM1160S/1"
alt="TRAXXAS X-MAXX Steel #45 Dogbone-3pc set - GPM TXM1160S/1" title="TRAXXAS X-MAXX Steel #45 Dogbone-3pc set - GPM TXM1160S/1"
alt="TRAXXAS X-MAXX Steel #45 Dogbone-3pc set - GPM TXM1160S/1" title="TRAXXAS X-MAXX Steel #45 Dogbone-3pc set - GPM TXM1160S/1"

Durable #45 Dogbones for Traxxas X-MAXX

Aftermarket dogbone kit compatible with TRAXXAS X-MAXX, catalogued as TXM1160S/1. The pieces use steel #45 construction to offer a tougher driveshaft alternative to thinner factory dogbones.

Technical notes: the shaft diameter increases from 5.5mm up to 7mm across the profile to help resist bending under heavy torque, and the terminal pins are specified at 3.5mm diameter. The package contains 1 pcs 3.5-thread steel collar and 1 pcs 3.0x20 steel pin along with the three dogbones.

Fitment and running advice: these parts are aimed at off-road and rally-style driving where extra shaft stiffness reduces deformation and improves driveline behaviour. Always confirm hub and axle bore clearances on your X-MAXX before fitting, check the 3.5mm pin engagement, and inspect retention hardware after initial use.

Compatible Models

  • Traxxas Xmaxx 6S

How do I check if these dogbones fit my hubs?

Measure your hub bore and pin location; these dogbones are designed around a 3.5mm pin and stepped 5.5-7mm shaft profile intended for Xmaxx 6S style hubs.

Are the collars reusable?

The steel collar included is durable and can be reused if undamaged, but inspect threads and seating after removal.

Any tips for break-in?

Run gently for the first few minutes, recheck fasteners and clearances, and monitor for unusual wear before pushing hard.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved