Graphite 2mm Upper Deck for Tamiya TRF421X - O-TCP010 by Factory Pro  [FP-O-TCP010]

Price:
£12.09
Brand:
Factory Pro
Model:
FP-O-TCP010
Condition:
Brand New
Write a review

Compatibility and fit summary

This upper deck is an aftermarket plate designed for the Tamiya TRF421X chassis, offered by Factory Pro as O-TCP010. It is intended to mate with the TRF421X layout and to provide a means of refining chassis stiffness for on-road setups.

As a 2mm graphite plate the part changes torsional response relative to typical stock decks, which can affect turn-in and mid-corner behaviour. Fitment is achieved using the chassis' existing mounting points and alignment features.

Installation notes: install using the original chassis fasteners where possible and check screw lengths and clearances during assembly. Confirm there is no interference with suspension towers or servo mounts and validate the setup on the bench before track use.

Specifications

  • Item: Upper deck
  • Material: Graphite 2mm
  • Model Number: O-TCP010
  • Compatibility: Tamiya TRF421X

Use this upper deck to fine-tune chassis rigidity and then balance changes with suspension and ride-height adjustments for optimum on-track performance.

The deck is produced to match the standard TRF421X mounting pattern. Verify your chassis layout against the deck mounting holes if you have modified or third-party components fitted.
Expect to make small setup adjustments such as ride height, damper tuning or anti-roll adjustments because the altered stiffness can change handling balance.
Yes. Different lower plate materials and thicknesses will alter overall torsional behaviour; test combinations to determine the preferred stack for your driving style.
Check that screws are correctly seated, there is no contact with moving parts, and that the deck does not introduce unwanted binding in the steering or suspension linkages.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved