Head Gasket Set for FS-200S OS44514100 - O.S. Engine  [OS44514100]

O.S. ENGINES HEAD GASKET FS-200S,FS-200S-FI 2PCS
Price:
£4.02
Brand:
O.S. Engine
Model:
OS44514100
GTIN:
4531028140936
Condition:
Brand New
Write a review

FS-200S engine head gasket replacement pack

The O.S. Engine OS44514100 head gasket set contains two replacement gaskets for FS-200S and FS-200S-FI engines. It provides the sealing surface between the cylinder head and crankcase and should be replaced whenever the head is removed for service.

By preserving compression and correct head spacing, the gasket contributes to steady idle behaviour and consistent top-end performance. Fitting a new gasket helps avoid leakage that would otherwise change mixture and complicate tuning efforts.

Practical fitting advice: remove all residues from the mating faces, fit the gasket squarely, and tighten head bolts in the sequence and torque recommended by the engine maker. After an initial run, cool the engine and recheck bolt tightness and for any seepage.

Compatibility

  • FS-200S
  • FS-200S-FI

How do I confirm this part matches my engine?

Verify your engine model is listed as FS-200S or FS-200S-FI and check the part number OS44514100 against your service parts list; this set is specified for those engines and includes two gaskets.

Is any special preparation required before fitting?

Prepare mating surfaces by removing old gasket material and cleaning with an appropriate solvent. Ensure no burrs or warping on the head or crankcase faces before installing the new gasket.

What should I look for during the post-fit check?

After running the engine, inspect the head area for fuel or exhaust seepage and re-torque bolts after cooling if necessary. Any signs of seepage indicate the gasket is not sealing correctly.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved