Hirobo EMBLA SZM2 Stabilizer Control Arm Set HI0304114 Replacement for tail linkage  [HI0304114]

Control arm set for EMBLA SZM2 stabiliser linkage

This stabilizer control arm set serves as a direct replacement for EMBLA SZM2 RC helicopters. It is limited to the stabilizer linkage function and provides the mechanical connection used when tuning tail response and eliminating minor yaw or pitch oscillations.

Delivered as a full set, the parts replace deteriorated or damaged control arms without changing main or tail rotor components. In workshop routines this is treated as a maintenance item used during tail geometry verification rather than a performance upgrade by itself.

On installation check the stabilizer linkage for free movement, ensure ball or clevis engagement is correct, and adjust gyro and transmitter endpoints to suit the swapped components. Only typical RC maintenance tools are needed.

Install this control arm set to reinstate accurate stabilizer geometry on EMBLA SZM2 helicopters, maintaining the tail linkage as designed and enabling careful tail stability adjustment at setup.