Walkera HM-4#3B-Z-04 Flybar Connector - Precision Replacement for 4#3B Series  [HM-4#3B-Z-04]

Walkera (HM-4#3B-Z-04) Flybar connector
Price:
£0.37£1.08
Brand:
Walkera
Model:
HM-4#3B-Z-04
Condition:
Brand New
Available in warehouse
Write a review

Restore steady handling with the Walkera flybar connector

The Walkera HM-4#3B-Z-04 Flybar Connector is intended for use on 4#3B models to help reinstate correct flybar alignment and control feel. Made to withstand normal service, it reduces unwanted movement in the rotor assembly so the helicopter responds more predictably. A straightforward swap when refreshing your head components.

Does replacing this part require rebalancing the rotor head?

After fitting the HM-4#3B-Z-04, check blade tracking and head balance. Minor trim adjustments may be needed to return handling to factory feel.

Can I use threadlocker on the fasteners?

A small amount of removable threadlocker is acceptable on head screws if recommended in your maintenance guide. Avoid permanent adhesives that make future servicing difficult.

Will this connector work with carbon or aluminium flybars?

The HM-4#3B-Z-04 is sized for standard 4#3B link geometry. Carbon or aluminium upgrades that keep the same link dimensions should be compatible, but always verify fit before flight.

Should I get a professional to fit the connector?

Most hobbyists can fit the connector with basic tools, but if you are unsure about head setup or trim, a service centre can ensure correct alignment and safety checks.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved