Hobbywing 30105000 EzRun MAX6 ESC 160A Waterproof Controller  [HW-30105000]

HOBBYWING EzRun MAX6 - 30105000
Price:
£0.00
Brand:
Hobbywing
Model:
HW-30105000
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING EzRun MAX6 - 30105000" title="HOBBYWING EzRun MAX6 - 30105000"
alt="HOBBYWING EzRun MAX6 - 30105000" title="HOBBYWING EzRun MAX6 - 30105000"
alt="HOBBYWING EzRun MAX6 - 30105000" title="HOBBYWING EzRun MAX6 - 30105000"
alt="HOBBYWING EzRun MAX6 - 30105000" title="HOBBYWING EzRun MAX6 - 30105000"

Power and Protection for Big RC Builds

The Hobbywing EzRun MAX6 ESC, model number 30105000, is designed to handle the demands of large scale RC cars and trucks, offering reliable high current control and programmable settings for serious hobbyists.

Performance That Holds Up

This ESC supplies consistent throttle response and controlled power delivery, which helps when launching heavy rigs or maintaining speed over rough surfaces. Settings can be tuned to match motor type and driver preference.

Engineered for Wet and Dusty Conditions

The MAX6 arrives in a waterproof, dust-resistant enclosure to protect sensitive electronics in adverse conditions, reducing the likelihood of failure during wet or sand-heavy outings.

Servo Power and Robust Switching

It includes an HV BEC with selectable voltage output for modern servos and a long-life electronic switch that withstands frequent use without premature wear.

Software Updates and Spark Suppression

Firmware updates and parameter adjustments are supported via Hobbywing USB LINK, LCD program box or laptop, while the anti-spark system minimises connector wear when connecting high-voltage packs.

Specifications

  • Continuous Current: 160A
  • Peak Current: 1050A
  • Input: 3-8S LiPo/9-24 Cells NiMH
  • BEC Output: Switch Mode: 6V/7.4V, 6A
  • Dimensions: 70.0x56.0x46.5mm
  • Weight: 240g
  • Fan Size: 35.0x35.0x10.0mm
  • Voltage Range: 5-7.4V

A strong choice for high-power models, the MAX6 balances current capacity and protection features for reliable large-scale performance.

Yes, for large short course trucks that draw within the ESC limits. Confirm expected motor current and ensure cooling is sufficient for sustained runs.
Use the MAX6 anti-spark feature and ensure connectors are clean and tight. If sparks persist, inspect battery leads and connectors for damage and consider pre-charge resistors for very high-voltage setups.
Confirm motor phase wires and battery polarity, secure solder joints or connectors, and plan airflow to the fan. Double-check BEC voltage for your chosen servos.
Firmware updates may reset certain parameters; back up current settings where possible or note key values before updating with USB LINK or the LCD box.
The unit is rated for 160A continuous but adequate cooling and correct battery selection are essential for prolonged high-current use to prevent thermal shutdown.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved