Hobbywing 30901071 XRotor Micro 30A ESC - Lightweight FPV ESC  [HW-30901071]

HOBBYWING XRotor micro 30A BLHeli - 30901071
Price:
£0.00
Brand:
Hobbywing
Model:
HW-30901071
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING XRotor micro 30A BLHeli - 30901071" title="HOBBYWING XRotor micro 30A BLHeli - 30901071"
alt="HOBBYWING XRotor micro 30A BLHeli - 30901071" title="HOBBYWING XRotor micro 30A BLHeli - 30901071"
alt="HOBBYWING XRotor micro 30A BLHeli - 30901071" title="HOBBYWING XRotor micro 30A BLHeli - 30901071"
alt="HOBBYWING XRotor micro 30A BLHeli - 30901071" title="HOBBYWING XRotor micro 30A BLHeli - 30901071"

Compact ESC optimised for FPV racing rigs

The Hobbywing XRotor Micro 30A ESC, model number 30901071, is designed to offer reliable power in a tiny footprint for race and freestyle quads. It keeps flight weight low while maintaining precise control characteristics.

Electrical components and efficiency

Equipped with the F396 48MHz MCU and Fairchild MOSFETs, this ESC delivers efficient switching and responsive performance. Ceramic capacitors and a combined 3-in-1 drive IC help with thermal stability and long-term reliability.

BLHeli flashing and setup options

BLHeli firmware can be updated via the signal cable, and when paired with a CleanFlight flight controller the unit supports simultaneous programming of several ESCs to speed up tuning and maintenance.

Throttle modes and braking behaviour

The XRotor Micro 30A supports Damped Light for smoother motor braking and OneShot125 for quicker throttle signalling, both of which improve handling during close-quarters flying.

Twisted-pair cable for reduced interference

The twisted-pair throttle signal lead helps cut down on interference during transmission, which contributes to steadier flight control in electrically busy surroundings.

Specifications

  • Cont./Peak Current: 30A/40A
  • LiPo Cells: 2-4S
  • BEC Output: No
  • Size: 24.0x13.9x5.5mm
  • Weight: 7g
  • Applications: FPVs with 130-280mm Diagonal Wheelbase
The ESC supports 2-4S LiPo batteries, so you can run it on 2S, 3S or 4S packs according to your power needs and motor selection.
No, this model does not include a BEC output. Plan to supply the flight controller and peripherals from a dedicated regulator or UBEC if required.
Use the supplied twisted-pair signal cable, route power leads separately, and keep solder joints tidy to reduce EMI and maintain clean throttle signals.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved