Hot Bodies Cyclone SSG Direct-Fit Graphite Deck CY-16/SG by 3Racing  [CY-16/SG]

Hot Bodies Cyclone Sport Version /Racing Version SSG Graphite Upper Deck - 3Racing CY-16/SG
Price:
£14.72
Brand:
3Racing
Model:
CY-16/SG
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Upper deck brace designed for Cyclone SSG

The CY-16/SG graphite upper deck is produced to fit Hot Bodies Cyclone Sport and Racing SSG versions as an OEM-style chassis brace. Its purpose is to modify torsional stiffness and refine handling at the chassis level.

Fitment follows the Cyclone SSG pattern and uses the original mounting points from the stock upper deck. Installation is suitable for experienced hobbyists; check alignment and torque on fastening hardware to maintain correct geometry and to avoid binding in suspension and steering linkages.

On track this component acts as a tuning aid rather than a performance cure. Increasing upper-deck stiffness reroutes loads through the chassis, which can reduce flex through corners and alter weight transfer. Use the deck together with incremental shock and anti-roll bar adjustments to achieve the handling balance required for your conditions.

Specifications

  • Item: Graphite Upper Deck
  • Material: Graphite
  • Model Number: CY-16/SG
  • Compatibility: Hot Bodies Cyclone Sport Version / Racing Version SSG

Choose the CY-16/SG if you need a direct-fit graphite upper deck to alter chassis stiffness on Cyclone SSG models, then tweak suspension settings to suit the revised chassis response.

Is the CY-16/SG compatible with all Cyclone SSG trims?

It is compatible with Cyclone Sport and Racing SSG trims using the stock upper deck mounting layout. Always verify fitment on your chassis before final assembly.

Does graphite change vehicle feel a lot?

Graphite increases stiffness without significant weight gain, which typically reduces unwanted flex and can sharpen handling; the magnitude depends on the rest of your setup.

Can I use the original screws when fitting?

Original screws are usually fine if they are in good condition. Inspect threads and heads, replace worn hardware, and avoid excessive torque to protect the graphite.

What testing should I do after installation?

Run a series of controlled laps making one setup change at a time, logging how damping, ride height and bar settings respond to the stiffer upper deck to find the best balance.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved