HPI Bullet 3.0 Graphite Centre Diff Plate Precision GBST038B by GPM  [GBST038B]

HPI Bullet 3.0 Mt And St Graphite Center Differential Plate - 1pc - GPM GBST038B
Price:
£5.87
Brand:
GPM
Model:
GBST038B
GTIN:
4894538066395
Condition:
Brand New
Write a review
alt="HPI Bullet 3.0 Mt And St Graphite Center Differential Plate - 1pc - GPM GBST038B" title="HPI Bullet 3.0 Mt And St Graphite Center Differential Plate - 1pc - GPM GBST038B"

Bullet 3.0 graphite centre differential upgrade

This aftermarket graphite centre differential plate is intended for the HPI Bullet 3.0 MT and ST platform and supplied as 1 pcs. The plate replaces the original centre diff plate and offers a different flex and heat response within the diff assembly.

In practical use the graphite plate alters torque transfer and temperature behaviour during sustained runs, making it a tuning choice for 1/10 electric Monster Truck (MT) and Stadium Truck (ST) configurations where diff feel is being adjusted.

Installation notes: follow the vehicle's diff rebuild sequence when fitting the plate, confirm clearances against the housing and neighbouring components, and apply the recommended diff grease and torque values to retention screws. Verify plate orientation and recheck gear mesh after assembly.

After fitting, perform a short validation run to confirm the expected diff response.

Is this a direct replacement for the stock plate?

It is designed for the Bullet 3.0 MT and ST centre diff layout, but verify the internal plate stack and spacer arrangement in your diff before fitting.

Does graphite need special maintenance?

No special maintenance is required beyond standard diff care: inspect for wear, keep mating surfaces clean, and use proper diff grease to maintain performance.

Will this affect handling dramatically?

Changes are generally incremental; the plate offers an alternative tuning parameter for diff feel and heat management rather than a wholesale handling change.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved