HPI Savage 1/8 Drive Coupling Adapter Purple JR-CHP-SAV-019 by Jazrider  [JR-CHP-SAV-019]

Alloy 1/8 Drive Adaptor (Purple) with Pins For HPI Savage Nitro Off Road Series - Jazrider Brand [JR-CHP-SAV-019]
Price:
£11.88
Brand:
JAZRIDER
Model:
JR-CHP-SAV-019
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Compatibility and fit guide

This alloy 1/8 drive adaptor with pins is supplied as a drivetrain replacement for HPI Savage Nitro off-road models. The unit is made from aluminium alloy, finished purple, and comes with retaining pins to secure the mating coupling.

The component operates as a mechanical coupler to transmit torque between drivetrain elements and is intended for hobby model cars. Emphasis is on dimensional compatibility with Savage-series drive parts rather than enhanced performance; fitment checks against your particular Savage chassis and drive hardware are recommended prior to final assembly.

Specifications

  • Item Alloy 1/8 Drive Adaptor (Purple) with Pins
  • Material Aluminium alloy
  • Model Number JR-CHP-SAV-019
  • Compatibility Suitable for HPI Savage Series

Use this adaptor to replace a worn coupling or when constructing a custom 1/8 drivetrain on an HPI Savage model; verify clearances, correct pin orientation during fitting, and re-torque fasteners after initial running.

Does the adaptor work with all Savage diff and shaft layouts?

The adaptor is suitable for HPI Savage Series, but differences in diff carriers or shaft finishes between models can affect fit. Confirm mating dimensions and, if necessary, adjust with shims or compatible hardware to ensure correct engagement.

Are there known clearance issues with certain body mounts?

Clearance varies by build; check side-to-side and axial clearances around the adaptor, especially where aftermarket bodies or cages are fitted. Trim or reposition components as required to avoid interference.

Can I use this with non-Savage driveline components?

While the adaptor is dimensioned for Savage-series components, it may mate with other driveline parts that share the same shaft and coupling geometry. Always verify fit and secure with correct pins and fasteners.

What should I check if I find play after fitting?

If play is present, inspect pin seating, coupling faces, and shaft diameters for wear or mismatch. Replace worn components or use accurately sized shims to remove unwanted movement before further use.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved